Jumo 211 - the second engine for the Ju 88

One engine is already being restored in England

29/12/2022
10:52
Arvid Martinussen

A new engine, a Jumo 211, was intended for the group at Mo once they had finished the DB 605. Unfortunately they were not allowed to keep the workshop premises, which meant that we had to take responsibility for the restoration in Bodø. One of the first things done was to get an overview of the spare parts situation. Both the engine in England and the one we are to restore will need spare parts. Fortunately there are several wreck engines in Hangar 9.

 

     
20 June 2014.    

 

 

 

Because our "news editor" Birger is on vacation and it's vacation time for most of the crew at the workshop, there have not been many newsletters lately. But all activities are not shut down.

Ivan and Roy have been busy dismantling one of the Jumo 211 engines mend to be used for spare parts. The engine was severely damaged during the crash landing. The front gearbox, crankcase as well as the crankshaft are broken, but there still were a lot of good parts to be used in the restoration of other engines. The main gearbox seems to be in good condition.

Parts to be used over again are cylinder liners, pistons, piston rods, camshafts, rocker arms, valves, bearings and a lot of special screws and bolts to name a few. Some parts will be used for the engine the crew at Mo is going to restore, but the major number of parts is going to England.

 

 

   
4 June 2014    

 

One of the two cylinder heads came off relatively easily while the other sat firmly in the long pin bolts. 

Klas had to use both wedges and crowbars in addition to the engine's weight before the cylinder head came free and could be removed.

The three people to the right, Marthe, Therese and Jack belong to the volunteer group. (Picture left)

     
 

Some parts of the spare engine were still oiled and seem to be in good condition. It should be easy to dismantle the crankshaft and the bearings. The engine has wet (loose) cylinder liners. It will ease the job of removing the pistons. Some of the cylinder liners and pin bolts for fastening the cylinder head are going to England, along with a number of other parts.

     

Above is one of the cylinder banks. The engine is a hanging V-12. Most cylinders and pistons look fine, others have a little rust.

To the right a cylinder head. Camshaft and rocker arms with valves (2 intake, 1 exhaust for each cylinder) looks very good, while the exhaust pipes is beyond any hope.

 
     

The engine bound for Mo looks really good from the outside. A hole in the cover to what would normally be the sump must be rectified.

 

Ready for the workshop.

     

The "snail shell" on the left of the engine is the supercharger.

 

 All that is anodized, yellow color, looks like brand new.

     

The propel hub was removed before transport. On one engine it was easy, on the other we had to use both wedges and crowbars. They heavy parts, and getting them off, reduced the weight by several kilos.

 

Klas Gjølmesli, ex captain of Widerøe and living in Trondheim, came up to Bodø to give us a hand. Give Klaus task, and he will not rest until "mission accomplished".
Overhead camshafts and multiple valves per cylinder is not a new invention!

 

 

   
28 May 2014     

Engine No. 2 of Ju88 W.No. 1203.

     

Second engine for 4N+EH.

 Ivan and Jon is well under way in preparing the second Jumo 211 engine (intended for our Ju88 project) for transportation.

As it seems today, this engine will be restored by our engine group at Mo I Rana. The engine will most probably be shipped to Mo I Rana sometimes September.

More about this later on!

Our reason for doing this job now is to be a little ahead of the events!