Work on the wings continues

A tissue is needed for the covering. It could be made from cotton, linen or some variant of artificial fiber. On the Sopwit Baby, there must be linen attached along the edges and to the ribs. To tighten the cloth, layers of dope are applied. It looks like a clear varnish that shrinks when it dries. The original nitrate dope is hard to find. We had some left over from previous projects, but we need more. Gunnar has to order it from a company in the USA. The consignment must go by boat due to the risk of fire and explosion. In the worst case, the shipment has to be kept in a small special container during transport.

22.07.2024
23/07/2024
13:02
Arvid Martinussen

...

© Arvid Martinussen (AM)
The wing is prepared before covering.
The wing is prepared before covering.
© AM
Ketil works on the leading edge of the wing.
Ketil works on the leading edge of the wing.
© AM
The ribs are tied together and reinforced with lacing tape, which gives a strong and flexible connection.
The ribs are tied together and reinforced with lacing tape, which gives a strong and flexible connection.
© AM
Fin and rudder finished covering with a good result, right side.
Fin and rudder finished covering with a good result, right side.
© AM
Left side.
Left side.
© AM
Gunnar varnishes the struts that will stand between the upper and lower wing. Good, old-fashioned oil varnish gives a glossy finish.
Gunnar varnishes the struts that will stand between the upper and lower wing. Good, old-fashioned oil varnish gives a glossy finish.
© AM
The struts hang up to dry. Beautiful work.
The struts hang up to dry. Beautiful work.