4 Videos - fabric
Video: Pulling out threads, Measuring and marking, Cutting and sewing the fabric
Making fabric bands with fringes
- Make the fringes by removing treads from the warp.
- Cut a straight edge that follows the warp as precise as possible – important.
- Pull out threads from the warp until the fringes are 3 – 5 mm long. Do not pull out too many threads at once.
- . Mark the cutting line. Use a template with the right width. The edge of the template should be where the fringe begins. Ideally, the cutting line should follow the threads of the warp.
- Cut as accurately as possible and pull out the threads on both the fabric band and the fabric you are making the fabric band from.