4 Videos - fabric

Video: Pulling out threads, Measuring and marking, Cutting and sewing the fabric

20.04
10/06/2026
09:10
Viktor Håkonsen

Making fabric bands with fringes

  1. Make the fringes by removing treads from the warp.
  2.  Cut a straight edge that follows the warp as precise as possible – important. 
  3.  Pull out threads from the warp until the fringes are 3 – 5 mm long. Do not pull out too many threads at once. 
  4. . Mark the cutting line. Use a template with the right width. The edge of the template should be where the fringe begins. Ideally, the cutting line should follow the threads of the warp.
  5.  Cut as accurately as possible and pull out the threads on both the fabric band and the fabric you are making the fabric band from.