The cowling is nearing completion

The shaping of the cowling is almost finished, with a few small things remaining. It has been sanded and the surface is ready for further treatment. An extension is to be welded on. Olav Ånesen has taken on that job. He believes that with the new welding machine it should be possible to weld aluminium sheets that are 0.5 to 1 mm thick.

03.02 + 24.03
03/02/2026
18:34
Arvid Martinussen

The shaping of the cowling is nearly complete, with only minor adjustments remaining. Grinding has been finalized, and the surface is now prepared for subsequent treatment. Side extensions will be welded, a task assigned to Olav Ånesen. With the new welding machine, it is feasible to weld thin aluminium ranging from 0.5 to 1 mm in thickness.

Click on the pictures

© Arvid Martinussen (AM)
03.02: A fine job. There is nothing to say about the surface. The paint will have a good grip.
03.02: A fine job. There is nothing to say about the surface. The paint will have a good grip.
© AM
03.02: An extension downwards is to be welded on.
03.02: An extension downwards is to be welded on.
© AM
03.02: The extension goes down to the blue plate.
03.02: The extension goes down to the blue plate.
© AM
03.02: The innermost edge is bent inwards. That makes the cowling stiffer.
03.02: The innermost edge is bent inwards. That makes the cowling stiffer.
© AM
03.02: The cowling will not be painted. Instead it is sanded and polished before a rotating steel brush is used. The result is shown on the inner edge in pictures 4 and 5.
03.02: The cowling will not be painted. Instead it is sanded and polished before a rotating steel brush is used. The result is shown on the inner edge in pictures 4 and 5.
© AM
24.03: The extension of the cowling is finished.
24.03: The extension of the cowling is finished.
© AM
24.03: The front section and the extension must be fitted so that the joint (the weld) is as neat as possible.
24.03: The front section and the extension must be fitted so that the joint (the weld) is as neat as possible.
© AM
24.03: The surface differs depending on whether a rotating fibre brush or a rotating steel brush is used. Nearest is the steel brush, furthest away the fibre brush.
24.03: The surface differs depending on whether a rotating fibre brush or a rotating steel brush is used. Nearest is the steel brush, furthest away the fibre brush.