Restoration of the BMW 132

Here we post pictures from the work of restoring a BMW 132 that is to go into the museum's Ju 52. The engine comes from a Ju 52 that crashed on Reinoksbreen in Sørfold on 8 June 1940

18/11/2022
09:00
Viktor Håkonsen

22.04.2015 

Securing plug caps

BMW 132 has a special arrangement that keep the spark plug caps in place on the plugs. The original equipment was mostly destroyed by rust, but a couple of the fasteners could be used as a template for copying.

Alf started the lathe and made the parts (picture  to the left), 18 sets in all.

Students Signe and Kathrine from Flyfag spent an evening to make the hoops of steel string.

Then they mounted the brackets on plugs. The result was sublime!

NB! We still lack 5 plugs to the engine. Is anyone sitting on a surplus, make contact!

31 May 2014

The engine is becoming more and more complete. The starter is in place. Below the starter hangs an intermediate piece, the carburettor and the air intake with the possibility of preheating the intake air. The air passes through a radiator that is heated by the exhaust. Among other things, this was to prevent icing in the carburettor.

Of the larger items still missing are the ignition system, the exhaust system and the air deflector plates. The air deflector plates are being painted and will be in place within the next few days. For the ignition system we lack 7 plug caps, and for the exhaust system we lack the clamps that attach the exhaust ring to the intake pipes on the cylinders. Getting hold of such parts can take time, and means that the work at times comes to a bit of a standstill.

26 March 2014.

We must also have time for a little cultural activity! Per has brought his guitar and amplifier and plays in honor of the local football team, Bodo Glimt. They are going to play their first match for years in the Premier League the coming weekend. Per is a great Glimt fan and  for the occasion he wore a jacket in Glimt’s colors. The motor gang seemed to enjoy having some music while working.

11 March 2014

Some of the bolts and nuts have to be secured with locking wire. Marte knows how to do it.

The space is limited!

Therese has dismantled the magnetos and cleaned them. After being treated with CRC 5-56 and oiled they turn as easy as if they were new.

Kenneth is persevering when it comes to putting the safety pins (cloth pins) on the nuts, and he has gradually acquired a good technique.

12 February 2014

We had two Stromberg carburetors, both with damages. One had a damaged floater housing; the other had a broken cover. Marte to the left and Sindre above, dismantled both carbs, cleaned them, selected the best parts, preserved them, and out of the two broken carbs arose one in perfect condition. Good work!

Kenneth has taken on the job of getting all the nuts in place on nine cylinders and secure them with cloth pins. There are dozens of nuts, and the job is monotonous and takes time.

Coming spring Therese will have finished the basic education for aircraft mechanics. Now she has to write applications for apprenticeship. She is uncertain whether to go for a career in the Air force or in a civilian company. Here Ivan is giving her some advices.

5 February 2014

All cylinders installed!

Last evening the last of the cylinders for our BMW 132 engine was installed. Still some external details are to be installed before we are finished.

21 January 2014

Last night in the workshop.

Last night the team installed more cylinders on the engine. Some new faces have been added to the workforce so now the workshop is at times like the Santas Workshop the last days before X-mas!

19 Nov. 2013

5 Dec. 2013

You can't find a better crew to work with! A nice mix of young and old.

July 2013

During July 2013 the cylinders were primed with two-component primer and painted with Bengal lacquer.

The work had to be done in four rounds to be sure that primer and paint had penetrated properly in between the cooling fins.

 11 June 2013

When we broke for the summer holidays the crankcase had been assembled and  was ready to have the cylinders fitted.

The pistons that were destroyed will not be replaced. It took too long to get hold of replacements. After all, the engine is to be a "prop" on the left wing of the Ju 52.

11 June 2013

A nut secured the German way.

It was at times cramped around the engine. It was the last day with the girls from Flyfag, and everyone wanted to finish their own bit.

Tonje refreshes the old marking. The colours had faded after the washing and use of chemicals.

Res. Ju 52. It is to stand in clear view - orange lettering.

Sandra touches up the marks left by tool use. Nothing to say about her concentration.

With so many screws, nuts and cotter pins, it is easy to touch the paint.

21 May 2013

Sindre, Sandra and Dina remove the tape that protects the screws from paint. In the background Roy Rusten, who has taken part in the work on the engine.

All the screws are to be secured with cotter pins. Quite a job, but good training for future aircraft mechanics. On this engine little locking wire had been used compared with the corresponding P&W.

 2 Apr. 2013

16 Apr. 2013

The valve lifters are put in place, 18 in all.

As the parts are put together, the table becomes tidier. 

5 March 2013

5 March 2013

Close-up of the disc with the cams that lift the valves. In the background two lentil lice.

26 Feb. 2013

All the large parts are ready to be assembled. After they had been dismantled they were washed and rinsed, dried, sand-

blasted, primed with two-component primer and painted with Bengal lacquer.

 7 Feb. 2013

19 Feb. 2013

Main components ready to be assembled.

Even the slightest trace of paint inside the holes for the valve lifters meant that the lifters would not go in. Paint residue had to be removed with a sanding cylinder on the drill. 

7 Feb. 2013

 7 Feb. 2013

Front housing with valve lifters and space for the front bearing for the crankshaft. Here fully painted. Inside the housing lies the disc with the cams that lift the valves.

The picture shows the master rod (straight up) and the slaves, i.e. the rods that are mounted on the crankshaft

7 Feb. 2013

7 Feb. 2013

The crankcase with room for 9 cylinders, fully painted. The crankcase consists of two parts, shells, which can be screwed together once the crankshaft and pistons are in place.

The turbine that supplies extra air to the engine. It runs at a speed corresponding to 10 x the engine speed. The pipes with a bend at the upper end lead the air to the cylinders.

20 March 2012

19 Nov. 2012

Yet another cylinder has been dismantled.

Rear housing on the engine. Here the generator, starter motor, magnetos and other external units are to be fitted. The part is ready for painting. The bare metal tells where the engine comes from.

13 March 2012

13 March 2012

In this cylinder the gudgeon pin was worn out of the piston without the piston itself moving a single millimetre.

Here you can clearly see what one of the stubborn cylinders looked like inside

 Drill and bayonet saw were the solution. One piston was sawn into 3 parts before it could be released in the press. Another came loose by our sawing slots in the casting.

We used the press and had 60 tonnes +++ without anything happening, except that one of the rods was worn off and another got an oval instead of round eye.

Sindre, who is a newly qualified aircraft mechanic, took on the job of dismantling valves and rocker arms in the cylinders. 

In time he too got a feel for stubborn pistons.

31 Jan. 2012

31 Jan. 2012

6 cylinders ready for sandblasting. The original German paint was so hard that our sandblaster fell short. We had to ally ourselves with Bodø Shipyard, which has heavier equipment, to get the job done. Thanks to them!

The girls got to know the parts of a radial engine well. They were careful to clean and sort the parts. Here John Skogøy has a chat.

31 Jan. 2012

31 Jan. 2012

It was quite a job keeping track of all the parts. They were put in bags and labelled as they were cleaned.

24 Jan. 2012

24 Jan. 2012

24 Jan. 2012

The students from Flyfag made new studs and fitted them to replace the ones that were damaged.

Here are Sandra and Dina in action with the studs

24 Jan. 2012

24 Jan. 2012

Crankshaft with master rod, counterweight and rear main bearing.

17 Jan. 2012

17 Jan. 2012

17 Jan. 2012

A single cylinder contains an incredible number of parts. If we multiply the number by 9, we get an idea of the size of the job. 

13 Dec. 2011

13 Dec. 2011

13 Dec. 2011

2011 was the year when problem-solving was on the agenda every voluntary work session. In time we got the engine dismantled, and the students from Flyfag took care of the parts.

We were still left with 5 pistons that were stuck fast in as many cylinders. These pictures will have to serve as a summary of the year so far.

16 Nov. 2010

4 cylinders came off without protest, 5 had decided to stay at their post. Here we try to push a piston out under hydraulic pressure. Unfortunately the valves in the cylinder were not tight.

During dismantling it turned out that the cylinders that had pointed downwards while the engine lay in the glacier had taken in water. That resulted in rust inside the cylinders, and the pistons were immovable. To split the crankcase the

cylinders had to come off. After trying some expert advice and a couple of old wives' remedies, we cut some of the studs that held the cylinders in place. That let us split the crankcase, but some of the pistons were still stuck in the cylinders.

2 Nov. 2010

These pictures were taken before the engine was dismantled, and some were taken along the way. Good to have when the jigsaw puzzle is to be put together again.

The original marking "Res. Ju 52" must be preserved when the engine is refurbished.