Dope and colours
The colour of the propeller in the picture is the colour that is to be on the fabric of the SB. Click on the picture for an enlargement.
Dope and Colouring
Problem 1: Applying Coloured Dope
We have already applied clear dope to most of the parts. This work has been carried out in the Widerøe paint shop on weekends, but the arrangement is demanding. Equipment and parts must be transported back and forth, and a Widerøe representative must be present throughout the work.
Because of this, we have looked for a more practical solution for applying coloured dope. Working outdoors in nice weather is not considered suitable, so we began exploring indoor options instead.
Our proposed solution is to purchase an inflatable tent with proper ventilation, designed specifically for this type of work. After suitable clearing, the tent can be set up in the carpentry workshop. It includes a powerful fan to maintain airflow, and we already have fresh-air masks available for use. We therefore see this purchase as a practical investment for future work.
Problem 2: Purchasing Coloured Dope
For many years, we have been in contact with a German company owned by a person named Kiroff, which specializes in making paints and varnishes based on traditional recipes. However, the company has now stopped responding to our enquiries, and it may no longer be operating.
The alternative is a company in England operates in the same marked. The challenge is that they do not normally produce for export. Nitrate dope is a dangerous stuff and requires special safety measures when shipped, usually in separate containers. This leaves us with a procurement issue that still needs to be resolved, and it is likely to be difficult.
Have a nice summer.