3D Print

If you go to the Clas Ohlson.no or Elkjøp.no websites and search for 3D printers, you get a good picture of the range on offer, what the printers look like and what they cost. Now those who work on restoring objects that are to be exhibited have been helped in that parts that cannot be obtained are made using 3D printing. We have found that the use of 3D printing is acceptable when the task is to make an exhibit look as complete as possible, as is the case with the Clerget engine, which is not to be fitted to the aircraft but to stand as a separate exhibit beside it.

30.04
30/04/2026
11:51
Arvid Martinussen

Click on the pictures

© Arvid Martinussen (AM)
30.04: The lowest rocker arm is 3D printed but not finished, that is, not sanded
30.04: The lowest rocker arm is 3D printed but not finished, that is, not sanded
© AM
30.04: The two rocker arms on the left are 3D printed and sanded. They have also been given a coat of varnish to match the original colour..
30.04: The two rocker arms on the left are 3D printed and sanded. They have also been given a coat of varnish to match the original colour..
© AM
30.04: Here the same person who made the rocker arms in picture 2 has made a model of a radial engine with 9 cylinders. All the parts move as on the original. This model is a fantastic aid when the working of the radial engine is to be explained.
30.04: Here the same person who made the rocker arms in picture 2 has made a model of a radial engine with 9 cylinders. All the parts move as on the original. This model is a fantastic aid when the working of the radial engine is to be explained.
© AM
04.05: The back of the engine with the pushrods
04.05: The back of the engine with the pushrods
© AM
04.05: Rocker arms and pushrods
04.05: Rocker arms and pushrods
© AM
04.05: In this close-up the layers of the print are clearly visible. On small details it simply has to be that way. It is difficult to sand the traces of the print away.
04.05: In this close-up the layers of the print are clearly visible. On small details it simply has to be that way. It is difficult to sand the traces of the print away.