Focke Wulf 190 A-3/U3

28/12/2022
13:42
Arvid Martinussen

 Focke Wulf 190.

On Friday 17th of April 2009 the Focke Wulf 190 returned to Bodo after its second stay in the United States, this time with Mark Timken in Florida. To those who had seen the plane only on pictures, it was exciting to see what the Americans had made out of it this time. I am not fully qualified to make a complete evaluation, but let me put it this way: I'm more impressed by the work done by the Hungarians on our Ju 88, than what is done with FW 190. I emphasize that this is my personal opinion. The pictures below shows the unloading outside our workskop.

Posted 20 April 2009.

At last the door of the container with the curious cargo was open.

We could establish straight away that nothing had been damaged during the transport from Florida. The items were far too well lashed down, braced and partly cast in place with expanding foam for that.

       

Operation "landing" is planned while Torgeir secures some pictures. To the left of the aircraft we can glimpse the wings, and on the floor the tail surfaces lie well wrapped up. There were also quite a few loose parts in the same shipment.

 

 

   

Tor, Birger and Ole Sigurd set about loosening straps and securing devices of various kinds.

The rear part had to be sawn free from the expanding foam. Plastic and cardboard had been laid against the fuselage so that the foam would not stick to the aircraft itself, but formed a stable cradle.

 

Ready for "Roll-out". An anxious representative of the Air Force Museum in a somewhat hesitant pose.

 

 

   

What would we have done without pallet jacks, blocks and planks?

Once again we had to resort to the "Birger method".

The heavy BMW 801 engine in the nose meant that considerable force was needed, both when pushing and when holding back downhill.

 

Finally out in the Bodø wind.

Those who want to know more about the aircraft type can click on

Focke Wulf 190

 

 

   

Birger with the pallet jack" was everywhere things were going slowly. Only once did he have to admit defeat. That was when the container had to be turned so that the aircraft would come out onto the asphalt and not onto the lawn.

Even with four pallet jacks, one under each corner, the container would not budge. A pick-up with a tow rope attached to one corner was the solution to that problem.

 

Tor Olsen, closest, has been responsible for the aircraft since he found it and got it salvaged from the crash site.

He did not say much, but was clearly both happy and relieved to have got the aircraft safely home.

 

 

   

Finally inside the workshop at Olav V gate 120.

The Norseman, which previously occupied the space, has been temporarily placed in Hangar 9.

 

 Even though the aircraft has had two restoration stays in the USA, first in Texas, then home and then back across the "pond" to Florida, there is still a lot of work left to do. How much will be done depends on time and money.

 

 

   

The engine is a BMW 801. It has 14 cylinders in two rows and looks impressive in such a small aircraft.

There is still some work left on the engine as well. We have parts, such as the magneto, which are to be fitted. There are also small things that have suffered a slight attack of rust in Florida's humid climate. Something must be done about this.

The ring in front of the engine with all the rivets is the oil tank, which to a certain extent also acted as an oil cooler.

      

The exhaust pipes are in place, but the intake pipes are missing.   

 

Those who want to know more about the engine can click on 

BMW 801 

 

 

   
 

The grey ring is part of the armour ring. Inside it lies a ring-shaped aluminium oil tank.

This aircraft type had a cooling problem that was worked on a great deal throughout the war.

The cooling fan has 12 blades and is geared up to rotate 3 times as fast as the engine.

The different versions of the engine had outputs from 1600 to 2000 hp.

The last version, which was built in only a few examples, had an output of as much as 2400 hp.

 

 

 

 

   

Text and photo: Arvid Martinussen